Mardave Two tenths 30ml Comm Drops

Mardave Two tenths Comm Drops BIG boy Bottle 30Ml

FOR USE ON BRUSHED MOTORS ONLY

This product is available for mainland UK shipping only.

• Add drop or two on the commutator every run will increase power. 
• Great to use when breaking in your new brushes. 
• Lubes commutator and keeps brushes from burning. 
• Comes in a (15ml) Needle Tip Bottle

Brushed Motor BREAK-IN Tip:

• For Breaking in a Brushed Motor, Best method is run the motor on low voltage less than 3 volts. 
• Start with a drop or two of oil on each bushing or bearing and a drop or two of comm drops on each brush. About half way through the break in add another drop or two of comm drops.
• For a sealed can motor like a Tamiya Mabuchi Motor I would run it for at least 1 hour. 
• For a Rebuildable Brushed Motor with stock or upgraded brushes run the motor for about 30 minutes

• If you have a motor mount to hold the motor add a small fan to motor shaft to blow air through the motor to keep it cool.
• When finished clean motor with electric motor spray and re-oil the bearings or bushings

Adding one drop of comm drops before a run will add a little performance, but brushes will wear quicker.